The Course is designed for Energy Managers and those responsible for Energy Management to gain a better understanding of how to quickly reduce energy consumption. It will give participants useful skills and techniques which can be put into practice straight away so that they can reduce their organisations’ energy consumption and costs. This one day course will cover:
General Energy Profiling (where us energy used the most)
How to identify and calculate actual savings – an introduction to professional measurement and verification techniques (IPMVP)
How to prioritise effectively energy saving initiatives to ensure senior management buy-in.
How to save energy by using the “Affinity Laws”
The hidden cost of compressed air and how to tap into savings
Pros & Cons of ISO 50001 and is it right for you
ESOS – what are the next steps
Techniques on writing business cases and getting them approved.
A certificate for attendance will also be issued for CDP purposes.
Includes, free parking endless tea and coffee and a good quality lunch too!
We now provide a physical on-site energy measurement, monitoring and verification service in a number of areas such as;
Electrical (kWh, kVA, Power Factor and harmonics) for both single and three phase circuits and motors. We use the latest Power Energy Loggers (PELs) and can produce a comprehensive report of our findings, including consumption costs and opportunities for savings.
Compressed Air system leak detection - we will identify costly leaks by using the latest ultra-sonic equipment. Again, we will independently estimate the leakage costs to your business and recommend the best solution(s). Remember, one tiny 6mm diameter hole can cost circa £20,000 p.a. on 7 bar system!
Lighting Levels - We can measure your current lightings levels (fluorescent and LED) and provide unbiased recommendations on how these can be reduced or improved for both cost savings and ambiance.
Heat Leakage - By using the latest thermal imaging cameras we can show you how energy is lost through poor insulation and or building fabric – a very useful and inexpensive way to save thousands of pounds
We are supporting and training major organisations in ISO 50001 and ISO 14001. We will soon be running our own Energy Training Courses to help our clients understand and manage their energy better.
Training is a great and easy way to expand your business and improve performance through engaging staff in sustainability issues. We offer a range of practical training and advice to help you understand and manage your own energy and maximise your business potential in a sustainable manner. We are able to teach the requirements and audit a number of certifications and accreditations, including;
ISO 14001 – 2004 and 2015 (Environmental Management Systems);
ISO 50001 – 2011 (Energy Management Systems); and
The Carbon Trust Standard
We work with a number of clients to ensure they achieve re-accreditations in the chosen standard and keep up-to-date with their audits, as well as support them in continuous improvement. We also implement successful employee engagement programmes which have shown consumption reductions of 31.5%! Energy standards and formation of Energy Strategies are second nature to us.
Eco-Fair is an annual environmental expo which takes place in Yorkshire. Now in its fifth year, the 2014 event is expected to attract over 1,000 visitors.
This is PASCHALi’s third year at Eco-Fair, and as always we expect to meet a whole variety of businesses to give them specialist advice on reducing energy consumption and associated costs.
Eco-Fair’s goals are simple. To inspire businesses to change and to help them find green business solutions to everyday problems. Speaker programme and exhibitors are chosen to provide support on four key topics: energy saving, waste reduction, greener transport and motivating change.
PASCHALi has become aware of a potential hazard in some biomass boilers when operating in slumber mode. The concern is that when operating in slumber mode partial combustion may occur generating unburned flue gases, including carbon monoxide.
It is important that:
1. The flue is designed to ensure that the carbon monoxide concentration cannot rise above the lower explosive limit. In particular, where the flue is fan assisted, it is important to make provision for the continued safe removal of flue gases in the event that either the fan or the power supply to the fan should fail;
2. The boiler’s fire door should never be opened when a boiler is operating in slumber mode because the inrush of air could result in a flash-over or explosion;
3. The fuel used is within the specification required by the boiler.
If you would like further guidance or advice please contact PASCHALi on 0113 25 15 700
The EU Energy Efficiency Directive (2012/27/EU) requires all Member States to introduce a regime of regular energy audits for ‘large enterprises’ (non-SMEs) to promote the uptake of cost-effective energy efficiency measures. These audits must be undertaken by 5 December 2015, and then every four years thereafter.
The consultation seeks views on the UK’s approach to meeting this requirement through implementing a new Energy Savings Opportunity Scheme (ESOS). The Government’s ambition is to develop a proportionate and better regulation approach, which yields real energy efficiency rewards.
For further information about how PASCHALi can help you with ongoing energy legislation please contact 0845 505 0255 or email email@example.com